에너지

UPS in wind power plants

Today, wind power plants are an important component of the energy supply portfolio in many industrial nations. These plants might appear to be somewhat unimpressive from the outside with their sedately turning rotor blades, but internally many components make up a highly complex technical system.

PULS products in their various forms and configurations are used at key operational locations within the plant, for example:

Buffering overall control

In the event that the power supply is interrupted, the entire plant control system needs to be buffered to guarantee continuity of critical functions. PULS DC-UPS (UB20) can be utilized here to guarantee a constant and continuous output voltage throughout the buffer time. This means that electrical components such as the control for the pitch drive units and the brake are reliably supplied with the required operating voltage in an emergency. In the event of a power failure, both the pitch drive units for rotor blade adjustment and the brake can be controlled to stop the rotor blades and move them into a safe position.

Power supply for pitch drive units

In addition to the control electronics for the pitch drive units, the continuity of the direct power supply also needs to be guaranteed. Here, the PULS PAS395 Ultracap Charger is a proven solution and is in common industry usage.

Emergency power supply for the interior tower lighting

The long power lines in the towers cause voltage drops that also need to be compensated for in the event of a power failure. PULS UPS modules are most commonly used for this scenario. Their voltages can be set individually from 22.5 – 26V and regulated continuously across the entire buffer time. This means that the voltage drops in long cables can be compensated for and the correct operating voltage to the lighting fixtures is guaranteed.